• Model Name: 54w led street light bulb
  • Model No.: MSL-E54
  • Power consumption: 54W
  • Luminous Flux: 5400lm
  • Life Span: 50,000Hours
  • IP Rating.: IP65
  • Certificates: CE, RoHS, UL, PSE, etc
  • Payment Term: TT & LC
  • Warranty: 3 years


E40 20W led street light           e40 24w led street light                e40 28w led street light                           e40 32w led street light

e40 36w led street light           40w street light bulb                      E40 street light bulb 42w                         48w led street light bulb

54w street light bulb                60w street lamp                               E40 80W street light                                E40 led street light 100w

An LED street light is an integrated light that uses LEDs as its light source. These are considered integrated lights because, in most cases, the luminaireand the fixtureare not separate parts (except LEDGine-based luminaires). New in manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sinkto become an integrated lighting fixture.

Different designs have been created that incorporate various types of LEDs into a light fixture. The current trend is to use high power 1 watt LEDs, but some companies use low power LEDs in their products, including several low power LEDs packed together to perform the same purpose as a single high power LED. The shape of theLED street light depends on several factors, including LED configuration, the heat sink used with the LEDs, and aesthetic design preference.

Heat sinks for LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange will directly affect the lifespan of the LED street light.

The lifespan of an LED street light is determined by its light output compared to its original design specification. Once its brightness decreases by 70 percent, an LED street light is considered to be at the end of its life.

Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case much of the luminance of the light is lost and produces light pollutionin the air and surrounding environment. Such street lights can also cause glare for drivers and pedestrians.

A drawback of LED focus panels is that most light is directed to the road, and less light to the footpaths and other areas. This can be addressed by the use of specialised lens design and adjustable mounting spigots.


Energy efficiency

The primary appeal ofLED street lighting is energy efficiency compared to incandescent bulbs of the same luminance. Research continues to improve the efficiency of newer models. One such advance can be found in a street light product created by Lighting Science Group Corporation. One model of LED street lights produced by this group is up to 60 percent more efficient than previous models, lasts for 12 years, and allows for cost recovery through energy savings in only three years.

An LED street light based on a 901 milliwattoutput LED can normally produce the same amount of (or higher) luminance as a traditional light, but requires only half of the power consumption.

As the LED lighting fixtures normally produce less lumen/Watt illumination it is very crucial to have a well distributed illumination pattern in order to do the same job as higher lumen/Watt conventional fixtures. So a good design of LED street lights is to point different LEDs in one fixture to different target points.



Low power consumption and long and predictable lifetime

The lifetime of LED street lights is usually 10 to 15 years, three times the life of current technologies adopted. LEDs also have low maintenance cost.


LEDs can be dimmed when less street lighting is needed, such as late nights and early mornings.

Small package size

More accurate color rendering

The color rendering index is the ability of a light source to correctly reproduce the colors of the objects in comparison to an ideal light source.

Quick turn on and off

Unlike fluorescent bulbs, which take time to heat up once switched on, LEDs turn on instantly, and do not have a problem restarting immediately after being turned off (hot ignition).

RoHS compliance

LEDs don't contain Hg/Pb and don't emit poisonous gases.

Less attractive to nocturnal insects

Insects are sensitive to the UV-blue and green region of the light spectrum. Nocturnal insects are attracted to the emission of UV-blue and green light from conventional light sources. White LEDs, however, emit light in a small peak in the blue range and smaller in the green range, so nocturnal insects are less attracted to such light sources.

Easy to design non-glare lighting equipment

Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case much of the luminance of the light is lost and produces light pollution in the air and surrounding environment. Such street lights can also cause glare for drivers and pedestrians.

Higher light output even at low temperatures

MIC 54w led street light Specification 

Model No.

MSL-E54 (54w led streetlight)


120W High Pressure Sodium Lamp

LED Light Source

54× 1W Bridgelux LED chip

LED Luminous Flux


Lamp Rated Total Power


Power Efficiency

> 86%

Lamp Rated Luminous Flux

> 5400lm

Lamp Rated Luminous Efficiency

> 95lm/w

Average Illumination and Effective Illuminated Area

4M Height

13m×5m   ≥ 39LUX

6M Height

20m×8m   ≥ 27LUX

8M Height

26m×10m  ≥ 22LUX

Color Index(CRI)

Ra >75

Color Temperature(CCT)

Cool white: 6000-6500K                                   Pure white: 4000-5000K                                Warm white: 2700-3500K

Beam Angle

Horizontal Axis: 120° / 140° ;                       Vertical Axis:    60° / 68°

Light Distribution Curve (Beam Pattern)

Asymmetric (Bat Wing) / Rectangular Beam

Input Voltage

AC 85-300V/277V ; DC10.8-26V

Frequency Range


Power Factor(PF)

> 0.95

Total Harmonic Distortion(THD)

< 20%

Storage Temperature


Working Environment

40-+50; 10%-95%RH

Junction Temperature(Tj)

60±10% (Ta=25)

Light Body and Lampshade Material

Aluminum Alloy and PC

Working Lifetime

> 50,000hrs

IP Rating


Net Weight


Gross Weight


Product Size(mm)


MIC LED Streetlights, revolutionary innovative technologies have created a new times of LED Lighting!


 MIC high power LED street lights, major revolutionary and innovative technologies have created a new times of outdoor LED street lighting!

**Super rated high power LED street lights to replace the traditional light source:

**green environmental protection and energy efficient;

**Rectangular beam pattern design, realizing high intensity, high uniformity, and eliminates glare;

**360 degree rotation lamp holder design, replace the conventional lamp directly, save costs, and easy maintenance.

MIC High Power LED Street Light Model 24w led street light MSL-A24

With generous appearance, novel and unique, the high power street light MSL-A24 was designed for the street lighting demand and fully meets the special requirements of street lighting. This product adopts the high power LED's as the light source, using dozens of high power emitters of 1 watt per LED. With the world’s leading optical allocation, advanced thermal, structural and circuit design, it is a highly cost-effective LED street light product.


The high power LED street lights adopt the high reliable eutectic welding LED packaging process, the thermal conductivity, electrical conductivity, thermal expansion, and mechanical soundness standard are higher than the ordinary silver epoxy packaging. Excellent heat dissipation design, LED junction temperature can be controlled in an ideal temperature (Tj < 70°C).

Fully guarantee and long life of the LED. High power factor and low harmonic distortion reduce power loss on transmission lines, avoid high frequency interference contamination power networks. Adopting surface anodization lampshade (lens) using engineering plastics PC, with resisting acid corrosion, smoke corrosion, ultraviolet aging characteristics.

Apply to replace: High-pressure mercury lamps, high pressure sodium lamps, metal halide lamps, energy-saving lamps.
Apply to install: Expressway, highway, roads, sub-roads, sidewalks, square sport grounds, industrial plants, and other advertising lights.

Previous Page: MSL-E48 - 48w led street light bulb Next: MSL-E60A - 60W led street bulb E40
Related products